Home Products Contact Dealers Catalog About us

Tumblers

Abrasives & Polishes

Saws

Arbors

Accessories

Laps

Jewelry Equipment

Manuals/Instructions

Catalog

How to Videos

Dealers





Trim Saws
Trim saws are used for trimming thin slabs to finished configurations. Our saws are
designed to use cutting oil as a coolant to deliver the best in cutting speed and blade life.


6" Trim Saw Package
Our new compact trim saw package features
a 81/2” x 9 3/4” Stainless Steel work surface,
sealed ball bearing arbor, arbor pulley, belt and
blade guard. Includes 6” diamond blade with
1/2” arbor hole and 1/3 hp motor.
Uses approximately 1 quart of cutting oil.
#051-292 $ 450.00


6" Basic
The basic unit without blade or motor.
Ready to be fitted with any 6” blade (w/ 1/2”
arbor hole). Requires a 1/4 hp motor or larger.
Unit can be mounted to your bench top or to the
optional base (sold seperately).
Shipping weight 15 lbs.
#051-291 $149.00

Optional Steel Base (6” Trim Saw only)
#051-203 $40.00


Stainless Steel
TS10-C Trim Saw
The perfect choice if you hate rust!
Includes 10" diamond blade, 1/3 hp motor,
plastic hood, vise and base. The worktable
has a 14-1/4" x 16-5/8" work surface and
centered blade.
#059-093 - $799.00



TS10 Stainless Basic
The basic unit without blade, motor, base,
vise or hood. Can be fitted with any 10” blade
(w/ 5/8” arbor hole). Requires 1/3 hp motor.
Mount unit to your bench top or to the optional
base (sold seperately).
#059-090 $370.00

Optional Steel Base (for TS10 only)
#059-007 $55.00



Rock Cutting Oil - Odorless !!
Protect your blade and saw!! This ultra-pure
mineral oil is a must for slab saws and is an
ideal lapidary coolant. Thin viscosity reduces
friction and lubricates screw-feed
mechanisms. 1 gallon.


Cutting Oil
#086-010 - $34.50
Low viscosity to prolong blade life and
improve cutting. Odorless. 1 gal.

Stainless Steel
TS8-C Trim Saw

For hobbyists and serious rock hounds.
The stainless steel TS8-C includes an
8” diamond blade with 5/8” arbor hole, vise,
plastic hood and motor with on/off switch.
The worktable has a 101/2” x 15” work
surface. Also includes sealed ball bearing
arbor, arbor pulley, 3/4” stainless steel
shaft, belt and blade guard.
Requires 2 quarts of cutting oil.
#051-392 $715.00


TS8 Stainless Basic
The stainless steel unit without blade,
motor, base, vise or hood. Can be fitted
with any 8” blade (w/ 5/8” arbor hole).
Requires 1/3 hp motor. Mount unit to your
bench top or to the optional base (sold
seperately).
#051-391 $305.00

Optional Steel Base (TS8 only)
#051-103 $55.00


Stainless Steel
FS8-C Trim Saw
Now available in stainless steel, this 8” saw
is perfect for those desiring the capacity of
a larger saw in an easy-to-clean design.
We made the work table larger and kept the
removable coolant pan. Includes vise,
hood, 1/3 hp motor, and equipped with
an 8” diamond blade with 5/8” arbor hole.
Requires 41/2 quarts of cutting oil.
#056-293 $750.00




FS8 Stainless Basic
The basic unit without blade,
motor, vise or hood. Can be
fitted with any 8” blade (w/ 5/8”
arbor hole). Requires 1/3 hp motor.
#056-292 $350.00



Lortone, Inc., 12130 Cyrus Way, Mukilteo, WA 98275 USA
(tel) 425.493.1600 (fax) 425.493.9494

Copyright © 2013 Lortone, Inc. all rights reserved.

Site map