LU6X-130
Use this machine where space is limited!
It combines the versatility of a trim saw and
arbor in one unit. Complete with 6" diamond
blade, silicon carbide grinding wheel, sanding drum, polishing head, 1/3 hp motor and
accessory package.

Model LU6X-130
#061-092 - $ 630.00



Manual (.pdf)

Model LU6X-130 Instructions & Parts List

Vibrating Laps
Designed to polish slabs, geodes, bookends, and clock faces. Heavy steel frame construction. Complete with separate grinding and polishing pans. We suggest starting with 220 grit, then 600, and finally Tin Oxide.

FL15 #030-091 - $ 540.00
FL20 #030-092 - $ 710.00

Flat Lapping Tips !!

Start with a good cut. Nothing takes longer than trying to remove saw marks. Get your saw and blade tuned up and you will see a dramatic drop in your lapping times.

Use fresh grit. As the rocks grind down, the grit gets contaminated with rock dust and becomes less effective. By changing your grit every 4-8 hours you'll get maximum cutting efficiency.

Keep Everything Clean!! We can't stress this enough. Any grit that is carried over to a finer stage will cause scratches and prevent the stones from polishing. Make sure that there are no small rock chips or other items on the polish pad. Even household dirt can ruin an otherwise good finish. Keep your polish pan in a plastic bag.